background image

4

PK 1 | Version 1.03

Safety

Tips and recommendations

It is necessary to observe the safety notes written in 
these operating instructions in order to reduce the risk of 
personal injuries and damages to property. 

2.2 Obligations of the operating company

of the operator

The operating company is the person who operates the 
device for business or commercial reasons by her-self, 
or leaves it to a third party for use or application, and 
who bears the legal product responsibility for the pro-
tection of the user, the staff or for third parties.

Obligations of the operating company

If the device is used for commercial purposes, the ope-
rating company of the device must comply with the legal 
working safety regulations. Therefore, the safety notes in 
this operating manual, as well as the safety, accident 
prevention and environment protection regulations ap-
plying for the area of application of of the device must 
be met. The following applies in particular:

- The operating company must be informed about 

the applying industrial safety regulations and fur-
ther analyse hazards resulting from the special 
working conditions at the place of use of the de-
vice. She must implement these in form of operat-
ing manuals for the operation of the device.

- During the entire lifetime of of the device, the ope-

rating company must verify whether the oper-ating 
manuals prepared by her correspond to the cur-
rent status of the regulations, and must adapt 
these if necessary.

- The operating company must unambiguously reg-

ulate and determine the responsibilities for instal-
lation, operation, troubleshooting, maintenance 
and cleaning.

- The operating company must ensure that all per-

sons who work with the device, have read and un-
derstood this manual. Furthermore she must in-
struct the staff in regular intervals and inform them 
about the hazards.

- The operator must provide the necessary protec-

tive equipment to the staff and order the use of the 
necessary protective equipment in a binding way.

Furthermore the operating company is responsible to 
keep the device always in a technically flawless state. 
Thus, the following applies:

- The operator must ensure that the maintenance in-

tervals described in this manual are kept.

- The operator must have all safety devices chec-

ked regularly for their good working order and 
their integrity.

CAUTION!

This combination of symbol and signal words indi-
cates a potentially dangerous situation which may 
lead to slight or minor injury if not avoided. 

ATTENTION!

This combination of symbol and signal words indi-
cates a possibly dangerous situation which may 
lead to property and environmental damages if they 
are not avoided. 

NOTE!

This combination of symbol and signal words indi-ca-
tes a potentially dangerous situation which may lead 
to material or environmental damage if not avoided.

Tips and recommendations

This symbol highlights useful tips and recommenda-
tions as well as information for an efficient and trou-
ble-free operation. 

Summary of Contents for 6172100

















Reviews: