unicraft 6201121, Operating Instructions Manual

8

SRWH-Series | Version 1.01

Description of the device

6

Description of the device

Fig. 3: Description of the floor jack SRWH 3002 EF

1   Pump lever
2   Tool tray
3   Type plate
4   Lifting arm 
5   Swivel castor
6   Jack saddle

Illustrations in this manual may differ from the original.

7

Mounting

Fig. 4: Delivery of SRWH 3002 EF 

1  Pump lever handle
2  Pump lever extension
3  Jack body
4  Operating Instructionsg

Fig. 5: Assembly of the pump lever

Step 1: Unscrew the screw on the underside of the 

pump lever handle (SRWH 3001 SIL model 
only), place the pump lever handle on the pump 
lever extension and screw the two pump lever 
parts together with the screw (SRWH 3001 SIL 
model only).

Fig. 6: Mounting the pump lever on the jack body

Step 2: The pump lever socket is fixed in the lower posi-

tion with a plastic block for transport. Remove 
the plastic block before assembly. To do this, in-
sert the pump lever into the socket and push the 
socket downwards.

Unscrew screw B until it no longer projects into 
the socket. 

Then insert the pump lever completely into the 
socket and tighten it with screw B in the socket.

Step 3: Check that the pump lever can be moved freely 

and easily.

Use protective gloves!

Wear safety boots!

Wear protective clothes!

CAUTION!
Risk of crushing!

Injuries ti hand and fingers may result from impro-
per use of the floor jack.

1

2

3

6

4

5