8
ESW-Series | Version 1.08
Transport, Packaging, Storage
5
Transport, Packaging, Stor-
age
5.1 Transport
Check the electrical cable winch on delivery for any visi-
ble transportation damage. If you notice any damage to
the device please report this immediately to the carrier or
dealer.
5.2 Packaging
All used packaging materials and packaging aids are re-
cyclable and should be taken to a materials recycling de-
pot to be disposed of.
The delivery packaging is made of cardboard, so please
dispose carefully by having it chopped up and given to
the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
5.3 Storage
Clean the electrical cable winch, oil the bearings and
store them in a frost-free and dry environment (max.
+55°C). Do not place anything on the electrical cable
winch.
6
Description of Device
6.1 Illustration
Illustrations in these operating instructions may de-
viate from the original.
Fig. 4: Description of device
1 Switch box
2 Power cable
3 Down limit pole for limit stop
4 Handle connection cable
5 Emergency stop button
6 Control panel
7 Junction box
8 Uplimit assembly for limit stop
9 Load hook
10 Pulley hook with safety bar and pulley
11 Spring buffer unit
12 Limit weight
13 Steel cable
14 Hook hanging device for operation with pulley
15 Automatic rope rolling device
16 Cable drum
17 Gear box
18 Protection hook
19 Safety switch
20 Hanging hook rack
6.2 Scope of delivery
- Electrical Cable Winch
- Power cable
- Control panel
- Operating instructions
NOTE!
The electrical cable winch should be protected from
humidity.
