background image

Intended use

KW-Series | Version 1.03

7

3 Intended use

The Crane scale is used solely to weigh free moving 
loads on the crane. The Crane scale may only be opera-
ted by persons trained on the machine.

Proper use also includes compliance with all information 
in this manual. Any use beyond the intended use or 
otherwise is considered misuse.

For structural and technical changes to the Crane scale, 
the company Stürmer Maschinen GmbH assumes no lia-
bility. 

Claims of any kind due to damage due to improper use 
are excluded.

3.1 Foreseeable misuse

If the intended use is observed, any reasonably foresee-
able misuse which could lead to hazardous situations 
with personal damage is impossible with the crane 
scales.

3.2 Residual risks

Even if all safety regulations are observed a residual risk 
in the operation of the crane scales will remain, as de-
scribed below. 

All persons working with the crane scales must be aware 
of these residual risks and follow the instructions which 
prevent any accidents or damage caused by these resi-
dual risks.  

- Risk of crushing of upper and lower limbs while 

equipment is operating.

- During set-up and adjustment works it may be-

come necessary to remove safety devices in-stal-
led by the customer. This causes different re-sidual 
risks and hazard potentials each operator must be 
aware of.

4 Technical Data

4.1 Environmental conditions

KW

KW 50

KW 100

Maximum load  
[kg]

5000

10000

Display

30 mm, 
5 digit LED/
LCD

38,1 mm, 
5 digit LED/
LCD

Display-         
gradation

<2000kg = 1kg
5000kg = 2kg

<2000kg = 1kg
5000kg = 2kg
10000kg=10kg

Tare

100 % the total capacity

Zero range

4 % the total capacity

stabilization 
time

<10 sec.

<10 sec.

Overload          
indicator

100% of max. Ca9e (45 g)

max. secure 
Load

125% of max. 
Capacity

125% of max. 
Capacity

max. Overload

400% of max. 
Capacity

400% of max. 
Capacity

Battery

re-chargable / 60-100h battery life 
until next re-charge 6V (10Ah)

Charger

220 V / DC 9 V / 1500 mA

Range remote 
control

10 m

10 m

Battery remote 
control

AA Batteries, 
1,5V x 2

AA Batteries, 
1,5V x 2

Weight [kg]

25

47

Working tempera-
ture

-10 °C to +40 °C

Altitude

set up and use at a height of 
max. 1000 m

Humidity

max. 90% relative humidity

working environ-
ment

not flammable,
dry and dust-free

Summary of Contents for KW 50

























Reviews: