24
PG-I Series | Version 1.03
Care, maintenance and repair
Step 4: Wash the filter element in soapy water, rinse with
clean water and dry with a clean cloth or allow
to dry completely.
Step 5: Oil the filter element and squeeze out the excess
oil. The filter element must be moist, but must
not drip.
Fig. 44: Oil the air filter
Step 6: Insert the filter element into the filter housing.
Step 7: Reassemble the cover.
11.7Clean fuel filter
Maintenance of the fuel filter must be carried out every 6
months or every 100 operating hours.
Step 1: Switch off the generator and let it cool down.
Step 2: Remove the fuel filler cap and the filter (1).
Fig. 45: Cleaning the fuel filter
Step 3: Clean the filter with petrol, replace if damaged.
Fig. 46: Cleaning the fuel filter
Step 4: Dry and reinstall the filter.
Step 5: Screw the fuel cap back on.
11.8 Spark plug maintenance
Spark plug:
PG-I 8 SR
CMR6A (Torch)
PG-I 12 SR
A5RTC (Torch)
PG-I 20 SR
A5RTC (Torch)
PG-I 35 SE
A7RTC
Electrode distance:
PG-I 8 SR
0,6 - 0,7 mm
PG-I 12 SR
0,6 - 0,7 mm
PG-I 20 SR
0,6 - 0,7 mm
PG-I 35 SE
0,6 - 0,7 mm
DANGER!
Do not twist the filter element when squeezing to
avoid damage.
DANGER!
Never start the engine without a filter element.
