Introduction
WPP 15 E | Version 1.02
3
1 Introduction
You have made an excellent choice in purchasing a Uni-
craft hydraulic workshop press.
Carefully read the operating instructions prior to commission-
ing.
They describe correct commissioning, intended use
and safe as well as efficient operation and maintenance
of your hydraulic workshop press.
The operating instructions form part of the hydraulic
workshop press. Keep these operating instructions at
the installation location of your hydraulic workshop
press. Please also note the locally applicable accident
prevention regulations and general safety regulations
for the use of hydraulic workshop presses.
1.1 Copyright
The contents of these operating instructions are pro-
tected by copyright. Their application is permitted within
the context of the use of the hydraulic workshop press.
Any further use shall not be permitted without written
consent by the manufacturer.
1.2 Customer service
Please contact your specialist retailer if you have any
questions regarding your workshop press or require any
technical information. Your specialist retailer will be
happy to support you with specialist advice and infor-
mation.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Germany
Repair service:
Hotline:
0049 (0) 900 19 68 220
(?0.49 from German landlines)
Fax:
0049 (0) 951 96555-111
Email: service@stuermer-maschinen.de
Spare parts orders:
Fax:
0049 (0) 951 96555-119
Email: ersatzteile@stuermer-maschinen.de
Please submit any information and experiences you
make during application of the machine as these may
be valuable for product improvements.
1.3 Disclaimer
All data in these operating instructions has been com-
piled on the basis of the state-of-the-art, valid standards
and guidelines as well as our many years of expertise
and experience.
The manufacturer shall not be liable for damage in the
following cases:
- Non-observance of these operating instructions
- Unintended use
- Deployment of untrained staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the de-
scriptions and illustrations in this document as a result of
special variants, optional extras or recent, technical
modifications.
The obligations defined in the supply contract shall ap-
ply in addition to the general terms and conditions and
the manufacturer's general terms and conditions as well
as the statutory regulations valid at the time of the con-
clusion of the contract.
2 Safety
This section provides an overview of all important safety
packages for personal protection as well as safe and re-
liable operation. The sections on individual service life
phases contain additional, specifically applicable safety
information.
2.1 Legend of symbols
Safety instructions
Safety instructions in these operating instructions have
been highlighted with symbols. Safety instructions are
indicated by signal terms that express the degree of risk
involved.
DANGER!
This combination of symbol and signal term indi-
cates a directly dangerous situation which may
cause death or serious injury if not averted.