Disposal, reusing used machines
WPP 15 TE | Version 1.06
15
12 Disposal, reusing used machines
In your own interest and to protect the environment make
sure that all machine components are exclusively dis-
posed of in as intended and permitted.
12.1 Decommissioning
Disused machines must be decommissioned immedi-
ately to prevent misuse at a later point and putting the
environment or persons at risk.
Step 1: remove all environmentally hazardous process-
ing materials from the used machine.
Step 2: if necessary, disassemble the machine into as-
semblies and components that are easy to han-
dle and suitable for recycling.
Step 3: the machine components and processing materi-
als must be disposed of using the intended dis-
posal methods.
12.2 Disposing of lubricants
Remove escaping, used or excess grease from the lubri-
cation points featuring lubricant.
Lubricant manufacturers provide disposal information for
the lubricants used. If necessary, request product-spe-
cific data sheets.
13 Spare parts
13.1 Spare parts orders
Spare parts are available from authorised retailers or di-
rectly from the manufacturer. The contact details have
been listed in section 1.2 Customer service.
The following key data is required for queries or spare
parts orders:
- Device type
- Item number
- Spare parts drawing number
- Position number
- Year of manufacture
- Quantity
- Desired shipping type (post, freight, sea, air, ex-
press)
- Shipping address
Spare parts orders without the aforementioned data can-
not be taken into account. The supplier shall determine
the shipping type if no relevant data was provided.
Data on the machine type, item number and year of
manufacture is listed on the type plate attached to the
workshop press.
Example
The pressure gauge for the Workshop press WPP 15 TE
must be ordered. The pressure gauge has the number
38 in the spare parts drawing.
By ordering spare parts, send a copy of the spare parts
drawing with the marked part (pressure gauge) and mar-
ked positon number (38) to the dealer or spare parts de-
partment and provide the following information:
- Type of device:
WPP 15 TE workshop press
- Item number:
6300015
- Position number:
38
DANGER!
Risk of injury caused by the use of
incorrect spare parts!
The use of incorrect or faulty spare parts may cause
risks for operating staff and damage as well as mal-
functions.
- Exclusively genuine spare parts made by the manu-
facturer or spare parts authorised by the manufac-
turer shall be used.
- Always contact the manufacturer if you are unsure.
Tips and recommendations
The manufacturer warranty shall be rendered void in
the event of a use of unauthorised spare parts.