2
WPP 15 TE | Version 1.06
Imprint
Product identification
Hydraulic workshop press
Item number
WPP 15 TE
6300015
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Germany
Fax:
0049 (0) 951 - 96555-55
email:
info@unicraft.de
URL:
www.unicraft.de
Information about the operating instructions
Genuine operating instructions
Edition:
27.10.2020
Version:
1.06
Language: English
Author: FL/MS
Copyright information
Copyright © 2020 Stürmer Maschinen GmbH, Hallstadt,
Germany.
Stürmer is the sole owner of the content of these operat-
ing instructions.
Forwarding and reproduction of this document as well as
use and notification of its content is not permitted without
explicit consent. Infringements shall oblige to payment of
compensation.
Subject to technical modifications and changes.
Contents
1 Introduction .............................................................3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Disclaimer ........................................................... 3
2 Safety........................................................................3
2.1 Legend of symbols.............................................. 3
2.2 Operator responsibility........................................ 4
2.3 Operating staff qualification ................................ 5
2.4 Personal protective equipment ........................... 5
2.5 Safety identifications on the workshop press...... 5
3 Intended use ............................................................6
3.1 Foreseeable misuse ........................................... 6
3.2 Remaining risks .................................................. 6
4 Technical data .........................................................6
4.1 Table................................................................... 6
4.2 Environmental conditions.................................... 6
4.3 Operating conditions........................................... 6
4.4 Type plate ........................................................... 7
4.5 Pressure gauge .................................................. 7
5 Transport, packaging, storage...............................7
6 Machine description................................................8
6.1 Scope of supply .................................................. 8
7 Setup ........................................................................9
8 Installation ...............................................................9
8.1 Installing crossbeam feet and press table .......... 9
8.2 Installing the pump unit....................................... 9
8.3 Installing the pressure gauge............................ 10
9 Before commissioning..........................................10
10 Operation .............................................................10
10.1 Adjusting the table height ............................... 11
10.2 Setting up the work area................................ 11
10.3 Adjusting the horizontal working position........ 11
10.4 Generate pump pressure............................... 11
10.5 Retracting piston............................................ 12
10.6 Mounting the pressure mandrel set ............... 12
10.7 Processing the workpiece............................... 12
11 Maintenance and repairs ....................................13
11.1 Cleaning maintenance .................................... 13
11.2 Maintenance and repairs ................................ 13
12 Disposal, reusing used machines .....................15
12.1 Decommissioning ........................................... 15
12.2 Disposing of lubricants.................................... 15
13 Spare parts...........................................................15
13.1 Spare parts orders .......................................... 15
13.2 Spare parts drawing........................................ 16
13.3 Hydraulic Circuit diagram................................ 17
14 EC Declaration of Conformity ............................18
15 Maintenance plan ................................................19
