Introduction
WPP 15 TE | Version 1.06
3
1
Introduction
You have made an excellent choice in purchasing an
UNICRAFT workshop press.
Carefully read the operating instructions prior to
commissioning.
They describe correct commissioning, intended use and
safe as well as efficient operation and maintenance of
your workshop press.
The operating instructions form part of the workshop
press. Keep these operating instructions at the installa-
tion location of your workshop press. Please also note
the locally applicable accident prevention regulations
and general safety regulations for the use of workshop
presses.
1.1 Copyright
The contents of these operating instructions are pro-
tected by copyright. Their application is permitted within
the context of the use of the workshop press. Any further
use shall not be permitted without written consent by
Stürmer GmbH.
We shall register trademark, patent and design rights for
the protection of our products, provided this is possible in
individual cases. We strongly oppose any infringement
of our intellectual property rights:
1.2 Customer service
Please contact your specialist retailer if you have any
questions regarding your workshop press or require any
technical information. Your specialist retailer will be
happy to support you with specialist advice and informa-
tion.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Germany
Repair service:
Fax:
0049 (0) 951 96555-111
Email:
service@stuermer-maschinen.de
Internet:
www.unicraft.de
Spare parts orders:
Fax:
0049 (0) 951 - 96555-119
Email:
ersatzteile@stuermer-maschinen.de
Please submit any information and experiences you
make during application of the machine as these may be
valuable for product improvements.
1.3 Disclaimer
All data in these operating instructions has been com-
piled on the basis of the state-of-the-art, valid standards
and guidelines as well as our many years of expertise
and experience.
The manufacturer shall not be liable for damage in the
following cases:
- Non-observance of these operating instructions
- Unintended use
- Deployment of untrained staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the de-
scriptions and illustrations in this document as a result of
special variants, optional extras or recent, technical
modifications.
The obligations defined in the supply contract shall apply
in addition to the general terms and conditions and the
manufacturer's general terms and conditions as well as
the statutory regulations valid at the time of the conclu-
sion of the contract.
2
Safety
This section provides an overview of all important safety
packages for personal protection as well as safe and reli-
able operation. The sections on individual service life
phases contain additional, specifically applicable safety
information.
2.1 Legend of symbols
Safety instructions
Safety instructions in these operating instructions have
been highlighted with symbols. Safety instructions are in-
dicated by signal terms that express the degree of risk
involved.
DANGER!
This combination of symbol and signal term indi-
cates a directly dangerous situation which may
cause death or serious injury if not averted.
WARNING!
This combination of symbol and signal term indi-
cates potentially hazardous situations which may
cause death or serious injury if not averted.
