6
WPP 15 TE | Version 1.06
Intended use
3
Intended use
The WPP 15 TE hydraulic workshop press is exclusively
intended for use in crafts and for repairs. It is suitable for
pressing in/out bearings, bushes, embossing, deforma-
tion and stamping. The capacity stated in the technical
data must not be exceeded. Do not apply excessive
force to workpieces. Check pressure loads on the pres-
sure gauge.
The hydraulic workshop press must be operated by per-
sons who have been instructed on the use of the ma-
chine only.
The intended use shall also include adherence to all in-
formation in these operating instructions. Any other use
or use beyond the intended use shall be deemed mis-
use.
Conversions at one's own responsibility or modifications
to the workshop press may invalidate the CE conformity
of the workshop press and this shall not be permitted.
Stürmer Maschinen GmbH shall not assume any liability
for design-based or technical modifications to the work-
shop press.
Unintended use of the workshop press as well as non-
observance of the safety instructions or operating in-
structions shall exclude the manufacturer's liability for
any resulting damage or injury and this shall void any
warranty claims!
Any claims resulting from damage due to unintended use
shall be excluded.
3.1 Foreseeable misuse
If the intended purpose of the workshop press is ob-
served, there is no actually foreseeable misuse that may
cause hazardous situations involving personal injury.
3.2 Remaining risks
Even when observing all safety instructions, operation of
the workshop press involves the remaining risks de-
scribed in the following.
All persons working with the workshop press must be
aware of the remaining risks and observe the instruc-
tions to prevent these remaining risks from causing acci-
dents or damage:
- Risk of pinching upper limbs during operation
- It may be necessary to remove installed protective
equipment to configure and equip the machine.
This causes various remaining risks and potential
hazards each user must be aware of.
4
Technical data
4.1 Table
4.2 Environmental conditions
4.3 Operating conditions
WARNING!
Risk of misuse!
Misuse of the machine may cause hazardous situa-
tions.
- Operate the machine within the performance range
stated in the technical data only.
- Do not bypass or disarm safety equipment.
- The workshop press must be operated in technically
perfect condition only.
Model
WPP 15 TE
Compression force
15 t
Foot width x depth
700 x 540 mm
Total height
965 mm
Inside width
500 mm
Work area
157 - 457 mm
Piston stroke
160 mm
Piston travel
169 mm
Hydraulic oil capacity
600 ml
Weight
75.5 kg
Model
WPP 15 TE
Operating temperature [°C]
-5 to +40
Storage temperature [°C]
-25 to +55
Transport temperatures [°C]
-25 to +70 (< 24 h)
Altitude range [m]
max. 1000 m
Humidity [%]
max. 85% relative
humidity
Working environment
Non-flammable, dry
and free from dust
Model
WPP 15 TE
Operating light [LUX]
> 300
