Manual – 3000 NRL Family
Unidata Manual - 3000 NRL Family - 06 08 2019.docx
Page 12
Parameter
Details
Logger Name
NRTID
NRT ID number.
SER#
Logger serial number.
Time / Date
Current logger time & date.
MAIN
Main power supply input voltage.
AUX
Auxiliary power supply input voltage.
RTCC
Internal Real Time Clock battery voltage.
Temp
Current logger internal temperature.
Baro
Current logger barometric pressure (not supported by all
models of NRL).
Press
DOWN
key to advance to next screen(s)
A00......A15
Voltages present on analog inputs.
Note that these may show spurious values if they are
unconnected or not supported by the model of NRL in
use.
C0......C7
Current values stored in logger counter registers. Not all
models of NRLs support all eight counter channels.
Unsupported channels will read zero.
Press
LOGGER STATUS
to advance to next screen
Baro xx.xdegC
Temperature of barometric pressure sensor
Acc xx.xdegC
Temperature of accelerometer sensor
X x.xxxG
Accelerometer X-axis value
Y y.yyyG
Accelerometer Y-axis value
Z z.zzzG
Accelerometer Z-axis value
Orient
ooo
Logger orientation value
DS2470BU
Acc -iii uAh
Coulomb counter value
MSP430 ChipID
xxxxxxxxxxxxxxxx
Processor identifier
ENC424J600
000000:000000
MAC device type
MAC address
MAX31826 Addr
xxxxxxxxxxxxxxxx
Internal temperature sensor
DS2470 Addr
xxxxxxxxxxxxxxxx
Internal Coulomb counter address
Press
DOWN
key to advance to next screen
LoRa EUI
xxxxxxxxxxxxxxxx
LoRa modem ID
100V001_001~001
mmm dd yyyy
hh:mm:ss
Firmware version, build date, build time
MMI V001
mmm dd yyyy
hh:mm:ss
LCD panel firmware version, build date, build time
