[ 5 ]
YOU NEED TO REGISTER THE WDECT2305 TO THE MAIN
BASE BEFORE USE!
1
Before registering the handset,
the battery pack must be
charged for 15-20 hours.
2
Place the extra handset in the
main base unit to begin
registration. (Picture is the
WDECT2315 series main base.)
3
While the handset is
registering, Handset
Registering will appear in the
LCD. When “
Registration
Complete
” is displayed, the
handset has been registered to
the base. If “
Registration
Failed
” appears, please try
these steps again.
• The handset can be registered when the main base is in
standby mode.
• Standby Mode - The handset is not in use and
has not been pressed.
Register the Handset
Cleaning the battery charging contacts
To maintain a good charge, it is important to
clean the charging contacts on the handset
once a month.
Use a dry cloth or pencil eraser to clean.
R e g i s t r a t i o n
C o m p l e t e
H a n d s e t
R e g i s t e r i n g
WDECT2305
Handset
WDECT2305
Handset
Charger
Main Base
WDECT2305 Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the WDECT2305
handset in the main
base to register.
1
2
3
contacts
Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so may discolor the surface of the
telephone and damage the finish.
UU881BH(WDECT2305) ENG 5/10/04 3:57 PM Page 5
