background image

between starting time and end time.
Press “FOLDER” to cancel A-B repeat and back to normal playing.
6.4.2 T-MARK:
In the playing state, press “T-MARK” to set the first index mark, press “T-MARK” again to set the
second, third ,...till the tenth mark...
Each recording file can be set 10 index marks at maximum.
Press and hold “T-MARK” can show out all location to be marked by T-mark symbol.
Then press “

” to select which T-mark want to start playing..

press “RED” button to play each T-mark set, press “FOLDER” to delete each “T-mark”...

6.5 Protecting a recording / lock file

You can avoid to delete some recording file by accident.
Select the recording file you want to remain, press “MENU” button, the display will show out
“LOCK”, .press these 2 button “

” the display show out “UNLOCK” that release the file,

press “RED” record key to confirm the selection..

7. Delete

In standby mode, select the folder and file you want to delete with
Press and hold “T-MARK” to enter into delete menu.

The display will show “

”, Press

to select delete one or delete all--

..

Press the “RED “record button to confirm the deletion.

8. Settings:
In standby mode, Press and hold “MENU” for 3 seconds to enter into the Settings, then press

” go into each set up in the setting.(press “ ” button to go out of the set up).

Note:

Under set up processing, Press “ ” will cancel the set up without saving and return to the

standby mode..
8.1 (MODE)Setting recording quality:

1. In standby mode, press MENU for 3 seconds.

2. Press

to select the

function.

3. Press

to select the mode of the recording quality that includes in 3 modes

HQ – High Quality,

Format: WAV, 384 kbit/s

SP – (Standard Quality)

,

Format: WAV, 128 kbit/s

LP – (Longtime Record) ,

Summary of Contents for AA 1103










Reviews: