background image

97

Taking care of your telephone

Your console contains sophisticated electronic parts, so you must treat it with care.
Avoid rough treatment. 
Place the corded handset down gently. 
Save the original packing materials to protect your console if you ever need to ship it.

Avoid water

You can damage your console if it gets wet. Do not use the corded handset in the rain, or handle 
it with wet hands. Do not install the console near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For your 
own safety, take caution when using electric appliances during storms.

Cleaning your telephone

Your console has a durable plastic casing that should retain its luster for many years. Clean it 
only with a soft cloth slightly dampened with water or a mild soap.
Do not use excess water or cleaning solvents of any kind.




Remember that electrical appliances can cause serious injury if used when you are wet or 
standing in water. If the console should fall into water, DO NOT RETRIEVE IT UNTIL YOU 
UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL, then 
pull the unit out by the unplugged cords.

Maintenance

Summary of Contents for AT4801













































































































Reviews: