E-9
Uniden Atlantis 150 Owner’s Manual
No.
Description
No.
Description
17
TX LO/HI Power Indicator
24
Battery Level icon
18
Triple Watch Indicator
25
US Channel Mode
19
WX Indicator
26
WX Alert mode indicator
20
“A” Channel Indicator
27
Charging Cradle
21
Memory Indicator
28
Charging Contacts
22
Keylock Indicator
29
Charging Indicator
23
Canada Channel Mode
CONNECTING POWER
The charging cradle uses a single AC adapter.
1. Connect the AC adapter to the DC 9V jack on the rear of the
charging cradle.
2. Plug the other end of the AC adaptor into a 120 VAC wall
outlet.
NOTE
•
The drop-in charger is not waterproof. Ensure
the radio is dry before connecting to the charger.
•
Don’t use the charger when the ambient
temperature is below 32ºF (0ºC) or above 113ºF
(45ºC).
INSTALL THE BATTERY PACK
Your radio uses the supplied NiMH battery pack. To install the
NiMH battery:
1. Make sure the radio is off.
2. Use a screwdriver to turn the battery compartment screw
counterclockwise and then lift up and remove the battery cover.
3. Put the NiMH battery pack in the battery compartment, applying
the battery contacts to the lower charge contacts. Be sure
to follow the instructions written on the battery pack’s label.
Installing the battery pack incorrectly will prevent the unit from
operating.