background image

You can scan in one of three ways:
1.

Service Bank Scanning

Press one of the six service bank

keys, 

[POLICE]

[FIRE/EMS]

[AIR/MRN]

[WX]

, or 

[CB]

to find an active frequency.

2.

Band Search

Select a frequency band to search. The

Search function is different from scanning. It searches for
any active frequency step by step within the lower and
upper limits of the band. When an active frequency is
found, the scanner will stop and stay on that frequency as
long as that transmission lasts. If that frequency is 
interesting to you, press 

[HOLD]

to hold the frequency in

the display. Then program it into one of the programmable
banks (Private, Police or Fire/EMS). If you do not want to
program that frequency, press 

[SEARCH]

or just wait untill

the transmission ends. The search resumes automatically
2 seconds after the last transmission and looks for more
active frequencies.

3.

PRIVATE Bank Scanning

If you have programmed 

frequencies into this bank, press 

[PRIVATE]

to scan only

those that you have programmed in this bank.

Note:

Before you can scan the Private bank, you must pro-

gram frequencies into the channels. To program 
frequencies, see "Programming Frequencies" on page 24.

When scanning stops on an active frequency, it remains on
that channel as long as the transmission continues. When the
transmission ends, the scanner will remain on the same 
channel for 2 more seconds, waiting for a responding 
transmission. If there is no responding transmission within 2
seconds, the scanning cycle resumes.

Getting Started

The following instructions apply when using your BC350C
(except for in the Program mode) for the very first time. Each
time you turn on the scanner, it always retains the previous
settings in its memory. That is, the scanner operates in the
mode and bank last used, until you change the settings.

1. Turn the Squelch 

[SQ]

fully clockwise to the end.

2. Power on the scanner by turning 

[VOLUME]

clockwise.

Adjust the volume to where you can hear a steady noise.

17

Scanning Overview

UB317Z (BC350C) 0916  9/16/03  12:43 PM  Page 17

Summary of Contents for BC 350C









































Reviews: