34
1. Hold down
WX
for about 2 seconds to turn on weather alert.
2. Hold down
E
for about 2 seconds.
If the scanner has not been set to alert for any FIPS code,
____
appears. If the scanner
is set to alert for all FIPS codes,
ALLFIPS
appears. If the scanner is set to alert only for
the area you programmed,
F1
appears.
3. Turn the rotary tuner or repeatedly press
HOLD
U
or
LIMIT
V
to enter a FIPS code
(1 through 15). Then enter the FIPS code and press
E
.
To set the scanner so it sounds an alert tone when it receives any FIPS code, turn the
rotary tuner or repeatedly press
HOLD
U
or
LIMIT
V
to move
ALLFIPS
to
F1
. To set
the scanner so it sounds an alert tone when it receives only one of the FIPS codes you
programmed, turn the rotary tuner or repeatedly press
HOLD
U
or
LIMIT
V
to select
F1
to
F15
. Then press
E
.
4. When you finish entering FIPS codes, press
E
.