11
temporary.Lockout - makes it easy to temporarily lock out
any channel or frequency. The lockout is cleared when you
turn power off, then back on so you don’t have to remember to
unlock the channels or frequencies later.
triple-conversion.circuitry - virtually eliminates any
interference from IF (intermediate frequency) images, so you
hear only the selected frequency.
text.tagging - you can name each channel, using up to 16
characters per name.
service.Banks - frequencies are preset in 10 separate Police,
Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB
Radio, FRS/GMRS/MURS, and Racing banks to make it easy to
locate specific types of calls and search any or all of these banks.
Priority.scan.with.do.not.disturb - lets you program one
channel in each bank (10 in all) and then have the scanner check
each channel every 2 seconds while it scans the banks so you
don’t miss transmissions on those channels. Do-Not Disturb
keeps the scanner from interrupting transmissions during
receiving.
Priority.Plus.scan - you can set the scanner so it scans only the
priority channels.
scan/search.delay/resume - controls whether the scanner
pauses at the end of the transmission to wait for a reply. You can
set the Delay time for each Channel, Close Call Search, Custom
Search, and Service search. You can also set a negative delay
where the scanner stops on transmissions for a set time then
automatically resumes.
