48
Note:
You can still manually select locked-out channels. If you
lock out all channels in the selected bank, the scanner displays
All Locked!
on the second line.
Unlocking Channels
1. Press Hold.
2. Enter the channel number you want to unlock and press
Hold again. (You can also press Hold and scroll to the
channel.)
3. Press l/O.
L/O
(or
TL/O
) disappears.
Unlock all Channels in Banks Currently Enabled for Scan
1. Press Hold to stop scanning.
2. Press and hold l/O until
Confirm Unlock All Channels?
appears in the display.
3. Press Pgm/E to unlock all or . Clr to cancel.
service.search.Mode
If you do not have a reference to frequencies in your area,
use a search to find a transmission. You can search for Police,
Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air,
CB Radio, FRS/GMRS/MURS, and Racing frequencies without
knowing the specific frequencies used in your area. The scanner
is preprogrammed with all the frequencies allocated to these
services.
To start a Service Search, press Func then Srch/Svc . When
the scanner finds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to
the delay setting (see page 42).
