52
• To store a frequency, press Pgm/E; see Storing Found Search
Frequencies on page 55.
• To temporarily lock out a frequency, press l/O.
• To permanently lock out a frequency, press l/O twice quickly.
See also Search Options on page 53 for Delay, CTCSS/DCS settings,
and locking out/reviewing/unlocking frequencies.
Quick Search Mode
Quick Search
mode allows you to enter a frequency and start
searching up or down from that frequency from any
Hold
mode
(except
Close Call Only/Weather Hold
).
To start a Quick Search in
Scan
or
Search
mode, press Hold
to hold on any channel or frequency. Enter the new frequency
(include a decimal point so you don’t go to a channel) and press
Hold again to set the frequency.
At Quick Search, press Hold to start searching.
To start a Quick Search at the current frequency during Close
Call Search, turn SCROll CONTROl in
Hold
mode and press
Hold to start searching.
When the scanner finds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to
the delay setting.
While searching in
Quick Search
mode, the upper line
displays
Quick Search
and the lower line displays the
searching frequency and the direction indicator (
↑
or
↓
) with the
modulation.