background image

2

You must program a frequency into each channel you want to use. If you do not
have any known local frequencies to program, a Uniden representative should be
able to provide you with a few sample frequencies.

Where to Obtain More Information

The Bearcat Radio Club and other similar hobby clubs have publications,
information on computer bulletin boards, and contests for the radio enthusiast. See
the enclosed printed material for more information. Additional information is also
available through your local library.

Taking Proper Care of Your Scanner

Do not use the scanner in high-moisture environments such as the kitchen
or bathroom.

Avoid placing the unit in direct sunlight or near heating elements or vents.

Do not plug the scanner into an outlet controlled by a wall switch as 
it could cause clock reset.

Unpacking

Carefully check the contents against this list:

BC244CLT Base Scanner

Telescopic Antenna

AC Adapter (Model AC-144U)

This Reference Guide

Registration Form 

Frequency Directories Order Form and other printed information

If any items are missing or damaged, contact the Uniden Parts 
Department at (800) 554-3988. Hours are from 8:00a.m. to 5:00p.m.
Monday through Friday, Central Time. We may also be reached
at www.uniden.com.

Complete and mail your Registration Form immediately.

Read this Reference Guide thoroughly before operating the scanner.

BC244clt.qxd  3/11/99  11:59 AM  Page 2

Summary of Contents for BC244CLT
































Reviews: