talkgroups in the Utilities agency. You can do this with just a
few key presses. To use
ID BLOCKOUT
just enter the
Agency- part, or the Agency-Fleet part, of the talkgroup code
and press
L/O
. For example, to Blockout Agency 4 in Trunk
Search, press
HOLD/MAN
,
0
,
4
,
(decimal key), and then
L/O
. For other ways to use partial AFS entry, be sure to read
the section "EDACS Reception".
Review ID Lockout
You can check all IDs already locked out.
1. Press
MENU/BACK
.
––– OR –––
1. When you press and hold
L/O
for 2 seconds in trunking,
you can also check all IDs locked out.
2. Select
2:SCAN OPTION
/
2:TRUNK
by rotating the
VFO
and
pressing
E
.
3. Enter the bank number using the
keypad and pressing
E
.
4. Select
6:L/O ID REVIEW
.
Restoring Locked-out IDs
To unlock a single ID, follow these steps:
1. Press
MENU/BACK
.
2. Select
2:SCAN OPTION
/
2:TRUNK
by rotating the
VFO
and pressing
E
.
3. Select the bank number by rotating the
VFO
and pressing
E
.
4. Select
6:L/O ID REVIEW
and the locked out ID you
want to unlock by rotating the
VFO
.
5. Press
L/O
. The ID is unlocked and the next locked ID
displays.
To unlock all locked out IDs in a bank once:
1. Press
L/O
for 2 seconds after selecting
6:L/O ID
REVIEW
in step 4.
.
58
L
LT ID:0-02-042
L/O ID REVIEW
BC250D 11/6/2 11:37 AM Page 58