Thursday, May 14, 2009
40
Set Alert Light
If “Set Alert Light” is selected, you can select from the following alert colors:
Off
Blue
Red
Magenta
Green
Cyan
Yellow
White
If you select “Off”, the scanner returns to the previous menu.
If you select an alert light color, the scanner goes to the Alert Light Pattern selection.
On
The alert light is set to on
Slow Blink
The alert light blinks slowly
Fast Blink
The alert light blinks fast
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set ID Format (DEC/HEX)
You can select the format for TGIDs on P25 and MOT type system.
Decimal Format
The scanner uses decimal format for TGIDs.
Hex Format
The scanner uses hexadecimal format for TGIDs.
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set ID Format (AFS/DEC)
You can select the format for TGIDs on EDACS WIDE/NARROW systems.
AFS Format
The scanner uses AFS format for TGIDs.
Decimal Format
The scanner uses decimal format for TGIDs.
Press [E / yes / gps] to accept the entry and return to the previous menu.
Summary of Contents for BC346XT
