41
in one of these banks, pressing that bank key will make the scanner
emit an error tone and the scanner will not scan.
Note: You cannot lock out any frequencies in the WX bank .
Lock Out Tips
If You Want to do This - Here’s How -
Temporary Lock Out
While on a channel or frequency, press
l/O once. The scanner beeps and
temporarily locks out that channel
and displays
T L/O
. If the scanner was
not in Hold mode, it then resumes
scanning. If the scanner was in Hold
mode, it does not resume scanning
until one of the following actions is
taken:
• Press HOld again to release the
Scan Hold function. Scanning
resumes on that bank.
Summary of Contents for BC355N
Page 1: ...1 OWNER S MANUAL BC355N SCANNER...
Page 67: ...67...
