18
Chain Search
Use Chain Search to find active frequencies in your area.
You can search all five personal bands at once or turn off
those bands you don’t want to hear. This gives you flexibility of
searching for any channel between 29 and 512 MHz, as long
as they are within the 10 frequencies bands covered by the
BC45XLT
. See the table on page 3, the Technical
Specifications on page 28, or the table on the back of the
BC45XLT
.
Setting a Search Range
An error message displays when
is pressed and you have not
either specified a search range in at
least one Chain Search band.
– OR –
If you attempt to turn off all
Personal Chain Search bands.
The Error message turns off.
Press
to select the band you
want to program.
To program a frequency range into one of the five personal
Chain Search bands, follow these steps:
1. Press
until the search
location you want appears in the
display.
2. Enter lower limit of the search
band.
a. Enter the frequency
number.
b. Then press
.
a
b
BC45XLT 11/2/00 9:04 Page 18
