13
Memory backup
- keeps the frequencies stored in memory
for an extended time if the scanner loses power.
Three Power Options
- Use the supplied USB cable to
charge the BC75XLT through your computer or other USB
charging port. You can also power the scanner using two
AA rechargeable ni-MH batteries (not included) or optional
alkaline batteries.
Key Confirmation Tones
- the scanner sounds a tone when
you perform an operation correctly, and an error tone if you
make an error.
battery Low Alert
- warns you when battery power gets
low. The Battery Low icon flashes (
) and a battery low
tone sounds every 15 seconds until the scanner is recharged,
turned off, or drained completely.
battery Save
- works when there is no transmission for 1
minute in
Scan Hold
mode and in any
Search Hold
mode
(does not work in
Priority Scan
and
Close Call Scan
modes).
This feature turns off rF power for 1 second and turns it on in
300ms intervals to extend the battery live.
Scan/Search Delay/Resume
- controls whether the scanner
pauses at the end of the transmission to wait for a reply. You
can set the delay time for each
Channel
,
Close Call Search
,
Custom Search
, and
Service Search
mode.
FREQUENCY RANGE
These tables list the frequency ranges, default frequency
step, default mode (AM or nFM), and type of transmissions
you can hear for each range for USA or Canadian bands.
Summary of Contents for BC75XLT
Page 60: ......
