36
to the nearest valid frequency. For example, if you enter
151.473 (MHz), your scanner accepts it as 151.475.
However, if you enter a frequency that is out of range,
the scanner sounds an error tone and
Error
appears.
Enter another frequency.
3. Press
Srch
. The scanner searches, starting from the
frequency you just entered. (Turn the scroll control
knob to change the search direction.) The scanner also
automatically turns on the delay function;
DLY
displays.
To turn off the function, press
Func + Dly
(see page 47).
Custom Search
You can adjust each preset search range’s upper and lower
frequency limits.
1. Press
Func
+
Psrc
. The scanner enters
Custom Search
mode and displays
SRCH
and
PGM
. The upper and
lower frequencies for Custom Search range 1 alternate.
2. Turn the scroll control knob to scroll through the rest
of Custom Search ranges until you find the one you
want. The search range numbers at the top of the screen
change as you cycle through them.
3. Enter the lower limit frequency and press
E .
The
frequency range flashes with the adjusted lower limit
frequency.
4. Enter the upper limit frequency and press
E .
The
adjusted frequency range flashes with the adjusted
upper limit frequency (both upper and lower
frequencies are now adjusted).
Summary of Contents for BC75XLT
Page 60: ......
