39
if you entered a frequency that has already been entered
elsewhere, the scanner sounds an error tone and displays the
channel that was duplicated. if you entered the frequency
by mistake, press
.Clr
twice to clear the frequency and enter
a different one. To enter the frequency anyway, press
E
to
accept.
Erasing a Stored Frequency
1. Find the frequency you want to erase. Press
Hold
.
2. Press
Func + Pgm
.
3. Press
0
and then press
E
.
4. The displayed frequency changes to all
0
s.
SCANNING
When you store frequencies into channels, those channels
are grouped into banks. Each bank contains 30 channels. You
can store service channels and non-service channels in the
same bank. For example, you can store a city’s fire, police,
marine, etc, together with utilities and other businesses.
There is no frequency range restriction per bank.
While you are scanning frequencies stored in the banks,
the word
SCAN
scrolls across the display. When it finds a
transmission, that frequency displays.
Enabling/Disabling Channel Banks
You can enable and disable each channel bank. When you
disable a bank, the scanner does not scan any of the 30
channels in that bank.
in
Scan
modes, press the number key that corresponds to
the bank you want to disable or enable. That bank number
Summary of Contents for BC75XLT
Page 60: ......
