background image

Important Notice

This scanning radio has been manufactured so that it will not tune to the radio frequencies
assigned by the FCC for cellular telephone usage. The Electronic Communications Privacy
Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or
cordless telephone transmissions or to market this radio when altered to receive them.

The installation, possession, or use of this scanning radio in a motor vehicle may be
prohibited, regulated, or require a permit in certain states, cities, and/or local jurisdictions.
Your local law enforcement officials should be able to provide you with information
regarding the laws in your community.

Changes or modifications to this product not expressly approved by Uniden, or operation of
this product in any way other than as detailed by this Operating Guide, could void your
authority to operate this product.

About this Manual

The screen displays used in this manual are representations of what might appear when
you use your scanner. Since the actual displays depend on the frequencies and user ID’s
for your area, as well as the settings you select, you may notice some differences between
what is in this manual and what your scanner displays.

4

Summary of Contents for BC895XLT
































































Reviews: