33
Operation
Operation
Turning On The Scanner and
Setting Squelch
Note: Make sure the scanner's antenna is
connected before you turn it on.
1. Turn
Squelch
fully counterclockwise.
2. Press and hold
for about 2 seconds to turn
the scanner on, then turn
Volume
clockwise until
you hear a hissing sound.
3. If the scanner is scanning, press
Hold
to stop
scanning, then turn
Squelch
clockwise until the
hissing stops.
Storing Known Frequencies
Into Channels
1. Press
Hold
. Then enter the channel number
where you want to store a frequency, then press
Func
and
Pgm
. The channel number appears.
2. Use the number keys and to enter the
frequency (including the decimal point) you want
to store.
3. Press
E
to store the frequency into the channel.
Notes:
•
If you entered an invalid frequency in Step 2,
Error
appears and the scanner beeps three
times. Enter a valid frequency.
•
The scanner automatically rounds the entered
number to the nearest valid frequency.
For example, if you enter 151.473 (MHz), your
scanner accepts it as 151.475.
•
When you enter a frequency into a channel, the
scanner automatically turns on the delay
function and
DLY
appears. When delay is turned
on, the scanner automatically pauses scanning
Operation
