46
Special Features
To skip a frequency, press
Func
and
L/O
when the
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it is
not in hold.
Follow these steps to clear a single frequency from
skip memory so the scanner stops on it during a
search.
1. Press
Hold
to stop the search.
2. Press
Func
+ or
Func
+ to select the
frequency.
L/O
appears.
3. Press
Func
+
L/O
.
L/O
disappears.
To clear all the skip frequencies at once while
searching or search hold, press
Func
then press
and hold
L/O
until the scanner beeps.
Notes:
•
If you selected all frequencies to be skipped
within the search range, the scanner beeps 3
times and does not search.
•
If you select more than 50 frequencies to skip,
each new frequency replaces a frequency
previously stored, beginning with the first stored
frequency.
•
Press
Func
+ or
Func
+ to select a
skipped frequency while
Hold
appears.
L/O
appears when you select a skipped frequency.
Delay
Sometimes a user might pause before replying to a
transmission. To avoid missing a reply on a specific
channel, you can program a 2-second delay into any
channel or frequency. The scanner continues to
monitor the channel frequency for an additional
