Friday, November 07, 2008
11
Multi-Site System
All trunked systems can have more than one site. All sites in the system share the same Channel Groups
and Channels.
Control Channel Only
Trunk Tracking can be achieved by entering only the control channels for Motorola and P25 systems.
P25 One-Frequency Trunking
The scanner can follow individual talk groups on P25 single-frequency systems that use both NAC and
d'/͛
s for squelch control and user identification. ID Search and ID Store are available, just like on trunked
systems.
Priority ID Scanning
Trunked channels can be assigned priority. When the scanner is monitoring the control channel, channels
you tag as priority are given a higher priority over non-priority channels when they become active.
Preemptive Priority ID Scanning
For Motorola systems that have channel priority active on the system, if you flag a channel as priority and
the system also has that TGID identified as a priority channel, the scanner will preempt any current
transmission if the TGID becomes active.
Trunking Activity Indicators
The scanner shows all trunked activity when you hold on the control channel.
Custom Search
You can program up to 10 custom search ranges and either search them exclusively or include these
searches when scanning.
Quick Search
If you hold on a conventional channel, you can start searching from the current frequency. If you hold on a
trunked channel, you can quickly switch to ID Search mode.
Frequency Autostore
The scanner can automatically store frequencies found during a search.
Search Speed / Turbo Search
x
100 Steps/Second in search mode (max, except for 5 kHz steps)
x
300 Steps/Second in search mode (max, 5 kHz steps)
x
Turbo mode automatically applies to 5 kHz step searches.
