Friday, November 07, 2008
46
Edit Name
You can name the site.
Refer to
FONT DATA
for the characters that can be entered.
Press [E / yes / gps] to accept the name entered. The scanner returns to the previous menu.
Set Quick Key
This option lets you select which Quick Key will rapidly lock/unlock the site in Scan Mode.
Turn [Scroll Control] to select the Site Quick Key. The Site
YƵŝĐŬ<ĞLJĐĂŶ ďĞĨƌŽŵ͞Ϭ͟ƚŽ ͞ϵϵ͟ĂŶĚ͘͟͞;с EŽƚ
assigned).
Press a number key to jump the cursor to the head number of ten's place. For example if you press [2 /
ƐƌϮ͕ƚŚĞĐƵƌƐŽƌ ũƵŵƉƐƚŽ͞ϮϬ͘͟
Press [E / yes / gps] to accept and return to the previous menu.
Set Startup Key
The scanner locks or unlocks the system according to setting of this option by pressing and holding a
number key at power-on or while displaying the Opening Screen.
Turn [Scroll Control] to select the Startup Key in this menu. The Startup Key can be set from
͞
0
͟
to
͞
9
͟
and
͞
.
͟
(= Not assigned).
Press [E / yes / gps] to accept the selection and return to the previous menu.
Edit Band Plan (P25)
This setting menu is shown when the selected system is a P25 Standard Trunked system.
Usually, the scanner stores the plan automatically when it receives the plan from a repeater. Therefore,
you do not have to set the plan in most systems. The plan must be set manually only when the repeater
doesn
͛
t send the plan.
You can set 16 bands for a site. First, select the Band Plan number (
͞
Select Plan
͟
) by turning the [Scroll
Control]. The scanner displays the Band Plan number, the base frequency and the spacing frequency as
͞
n:xxx.xxxxx
/
y.yy
͟
. (n : Band Plan number,
xxx.xxxxx
: the base frequency,
y.yy
: the space frequency)
Press [E / yes / gps] to select a band plan.
Input the base frequency (
͞
Input Base Freq
͟
). This frequency can be from 25.00000MHz to
1300.00000MHz at 5.0Hz steps. Press [E / yes / gps] to set the base frequency.
Set the space frequency (
͞
Input Spacing
͟
). You can input from 125Hz to 128.0kHz in 125Hz Steps. Press [E /
yes / gps] to finish the band plan setting.
If you enter an out of range value for the base frequency, the scanner displays
͞
Out of Band
͟
and
͞
Press
Any Key
͟
and sounds an Error Tone. Press any key to return to editing mode.