Friday, November 07, 2008
83
Set Delay Time
This setting controls how long the scanner stays on frequencies after a transmission ends before resuming
searching.
Turn [Scroll Control] to select the delay time setting from the following list:
-10 sec
-5 sec
-2 sec
0 sec
1 sec
2 sec
5 sec
10 sec
30 sec
Then press [E / yes / gps] to accept and return to the previous menu.
Set Modulation
You can select the modulation from the following settings.
Auto
The scanner uses the modulation normal
ĨŽƌ ƚŚĞĨƌĞƋƵĞŶĐLJ͛Ɛ ďĂŶĚ͘
(See:
Band Defaults
)
AM
The scanner uses AM demodulation.
NFM
The scanner uses Narrowband FM demodulation.
FM
The scanner uses FM demodulation.
WFM
The scanner uses Wideband FM demodulation.
FMB
The scanner uses FM Broadcast demodulation.
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set Attenuator
You can select to attenuate RF reception on all frequencies in the search range.
On
The frequencies are attenuated.
Off
The frequencies are not attenuated.
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set Step
You can select the search step for Custom Search.
Auto
Automatically assign the search step based on the band.
5.0 kHz
15.0 kHz
6.25kHz
20.0 kHz
7.5 kHz
25.0 kHz
8.33kHz
50.0 kHz
10.0 kHz
100.0 kHz
12.5 kHz
Press [E / yes / gps] to accept the setting and return to the previous menu.
