Friday, November 07, 2008
98
Tone-Out for
ǥ
This menu lets you set the following items.
Tone-Out Standby
Tone-Out Setup
Select
͞
Tone-Out Standby
͟
to start monitoring the Tone-out Frequency.
Select
͞
Tone-Out Setup
͟
to go to
Tone-Out Setup
.
Tone-Out Standby
When this item is selected at
Tone-Out for
͙
, the scanner exits from Menu Mode and goes to Tone-Out
standby Mode.
Tone-Out Setup
You can edit the 10 Tone-Out channels.
The Names of the Tone-Out channels are displayed as Menu Items.
Default names as follows.
Tone-Out 1
Tone-Out 2
Tone-Out 3
:
Tone-Out 10
Select the Name and press [E / yes / gps] to go to
Tone-Out Settings
.
Tone-Out Settings
You can edit these settings.
Edit Name
Set Frequency
Set Tone
Set Delay Time
Set Alert
Set Audio AGC
Press [E / yes / gps] to go to each setting.
Note: The first line displays the name of selected Tone-Out channel.
Edit Name
You can name the Tone-Out channel.
Refer to
FONT
DATA for the characters that
can
be
entered.
Press
[E / yes / gps] to accept the name entered. The scanner returns to the previous menu.
