79
Programming Your Scanner
Notes:
• Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
[.No]
then both digits.
• You can assign as many systems to the same quick key as you want.
• To be scanned, a system’s Quick Key must be activated and the system must
be unlocked.
[MENU]
Program System
F
Select a conventional system
F
Edit Sys Options
F
Set Startup Key
F
Select a startup key from 0-9 or select “.” for no startup key.
Notes:
• To unlock the system at startup, press and hold the selected startup key while
you turn on the scanner.
• The system Quick Key is also enabled.
• If you press a different key at startup, the system is locked out.
• If you do not assign the system a startup key, the system is not affected by any
key press during startup.
[MENU]
Program System
F
Select a conventional system
F
Edit Sys Options
F
Set Lockout
F
Unlocked
— The system is scanned when its quick key is enabled.
Temporary L/O
— The system is not scanned, even if its quick key is enabled.
Cycling power will remove the lockout.
Lockout
— The system is not scanned, even if its quick key is enabled. You must
manually unlock the system.
Setting the Startup Key
C
Setting the System Lockout
C
