86
[MENU]
Program System
F
Select the existing system
F
Copy System
F
New Sys Name?
Enter your new name using the
Scroll Control
and
[4]
and
[6]
to move to the right
or to the left one character of the display. Press
F
when finished.
[MENU]
Program System
F
Select the existing system
F
Delete System
F
Confirm Delete?
Yes=”E” / No=”.”
Important:
Deleted systems cannot be restored. You must re-enter them.
This section covers settings that apply to trunked radio site. You must program at
least one site for each trunked radio system. When you program multiple sites, all
sites share the same channel groups and channels within the system.
Note:
You can only program one site in an EDACS SCAT and LTR system.
Each site name can be up to 16 characters. Abbreviate as necessary to fit. The
site name alternates with the Channel group when the scanner stops on a
channel.
The default site names include the following letter in the 16th position to indicate
the system type:
MS1: Motorola 800 MHz Type I Standard
MS2: Motorola 800 MHz Type II Standard
MP1: Motorola 800 MHz Type I Splinter
MP2: Motorola 800 MHz Type II Splinter
M92: Motorola 900 MHz
MV2: Motorola VHF
Deleting Systems
MECSL
Programming Sites
MESL
Setting the Site Name
ME
