Easier to Read BCD396T/UBCD396T Digital Scanner Manual
shows the name of the
currently
scanned
system in
Scan Mode
.
shows the name of the
currently
searched
custom/service search in
Search Mode
.
will alternate the
system name
and
channel group name
for a system in
Receiving
or
Hold
Modes
.
will alternate the
custom search name
and
system name
for a
trunking
system for a 'C-Ch only Search' in
Receiving
or
Search Hold
Modes
in
text
display mode.
will alternate the
custom search
name
and
'SID'
for a
trunking
system for a 'C-Ch only Search' in
Receiving
or
Search Hold
Modes
in
ID/frequency
display mode.
3rd Line
will scroll 'SCAN' (for a conventional system), 'ID SCAN', or 'ID SEARCH' (for a trunked system) and show an up or down arrow to indicate the scan direction in
Scan
Mode
.
will scroll the search frequency range/channels and an up or down arrow to show the scan direction in
Search Mode
.
shows the frequency or ID (or text tag if programmed) for a channel in
Receiving
or
Scan Hold
Modes
.
shows the search frequency (and the channel number for CB, Rail, and FRS/GMRS/MURS service searches) in
Receiving
or
Search Hold
Modes
.
shows the ID (with C-Ch only on) in
Receiving
or
Search Hold
Modes
.
will scroll
SEARCH
in
Close Call Only Mode
.
4th Line
appears when receiving a
conventional
priority channel in
Receiving
or
Hold
Modes
.
shows the
acquired
control channel frequency of a trunking system in
Scan Mode
.
shows the modulation and attenuation (if on) of a
non-acquired
trunked system in
Scan Mode
.
shows the voice channel of a trunked system in
Receiving
or
Hold
Modes
.
shows the receive modulation of the
conventional
channel in
Receiving
or
Hold
Modes
.
shows the receive modulation of the custom/service search in
Search
Mode
.
ATT
appears if the channel/search is attenuated in
Receiving
or
Hold
Modes
.
shows the tone code (if received) for a conventional frequency if programmed and
blinks
in CTCSS/DCS search mode in
Receiving
or
Hold
Modes
.
P25
appears if the channel is receiving digitalized voice in
Receiving
or
Hold
Modes
.
LNK
appears if the channel is receiving data in
Receiving
or
Hold
Modes
.
DAT
appears if the control channel is being received in
Receiving
or
Hold
Modes
.
ENC
appears if the channel is receiving encrypted voice in
Receiving
or
Hold
Modes
.
shows the trunking activity indicators (when scanning a trunked system) for 10 seconds when
Vol
is pressed in
Scan Mode
.
5th Line
S0-9:
shows the first digit of (systems assigned to) the
currently scanned quick key
on the left with the
blinking
second digit (
1-0
) on the right in
Scan
or
Receiving
Modes
.
In
Hold Mode
, only (systems assigned to) the current quick key appears.
a non-blinking
number
on the right indicates the quick key is enabled waiting to be scanned.
a
-
(dash) means nothing is assign to the quick key.
an
*
(asterisk) means the quick key is turned off.
will appear if the Close Call 'Priority' feature is on in
Any Mode
except Tone-out.
will appear if the Close Call 'Do-Not-Disturb' feature is on in
Any Mode
except Tone-out.
SCR
appears if one or more broadcast/custom screen bands is turned on in
Receiving
or
Search Modes
.
REP
appears if repeater reverse is turned on in
Receiving
or
Search Modes
.
shows the volume level is ready to adjust if you press
Vol
.
shows the squelch is ready to adjust if you
press and hold
Func
then
Vol
.
6th Line
GRP
shows the group quick keys (
1-0
) for each system with (groups assigned to) the
currently scanned quick key
blinking
in
Scan
or
Receiving Modes
.
In
Hold Mode
, only (groups assigned to) the current quick key appears.
a non-blinking
number
on the right indicates the quick key is enabled waiting to be scanned.
a
-
(dash) means nothing is assign to the quick key.
an
*
(asterisk) means the quick key is turned off.
http://marksscanners.com/396/396.shtml (13 of 51)8/17/2010 10:11:40 PM
