Easier to Read BCD396T/UBCD396T Digital Scanner Manual
To program a new channel
press
Menu
. At '
Program System
' press
E/yes
.
At '
Select System
' scroll to system where you want to program a channel and press
E/yes
.
Scroll to '
Edit Group
' and press
E/yes
.
At '
Select Group
' scroll to the group that you want to program the channel in and press
E/yes
.
Scroll to '
Edit Channel
' and press
E/yes
.
At '
Select Channel
' scroll to '
New Channel
' and press
E/yes
.
At '
Input Frequency (or TGID)
' enter the frequency or ID and press
E/yes
.
To enter a Conventional Frequency
enter the Frequency and press
E/yes
.
To enter a Motorola Type II ID
enter the ID and press
E/yes
.
To enter a Motorola Type I ID
enter the fleet number, press
(.)no
once
for a hyphen, then enter the subfleet and press
E/yes
.
Note:
If you omit the subfleet (still need the hyphen), the scanner treats this field as a wildcard (will treat the subfleet as 1 ID and receive all IDs in the
subfleet).
You can also lock out this subfleet ID so you will not receive it.
To enter a Motorola I-Call ID
,
press
(.)no
once
then enter the ID and press
E/yes
.
To enter a Motorola Wildcard (receive any) I-Call ID
,
press
(.)no
once
then enter
0
and press
E/yes
.
Note:
You can also lock out this wildcard ID so you will not receive I-Calls.
To enter an EDACS ID in AFS (default) format
,
enter the agency number, press
(.)no
once
for a hyphen, then the fleet and subfleet and press
E/yes
.
Note:
If you omit the fleet and/or subfleet (still need the hyphen), the scanner treats these fields as wildcards (will treat the fleet and/or subfleet as 1 ID and
receive all IDs in the fleet and/or subfleet).
You can also lock out this fleet and/or subfleet ID so you will not receive it.
To enter an EDACS ID in Decimal format
,
enter the ID and press
E/yes
.
To enter an EDACS I-Call ID
,
press
(.)no
once
then enter the ID and press
E/yes
.
To enter an EDACS Wildcard (receive any) I-Call ID
,
press
(.)no
once
then enter
0
and press
E/yes
.
Note:
You can also lock out this wildcard ID so you will not receive I-Calls.
To enter a LTR ID
,
enter the area code (
0
or
1
) and press
(.)no
once
, then enter the home repeater number (
01
-
20
) and press
(.)no
once
, then the user ID (
1-
254
) and press
E/yes
.
Note:
If you omit the user ID (still need the hyphen), the scanner treats this field as a wildcard (will treat the home repeater as 1 ID).
You can also lock out this home repeater ID so you will not receive it.
Note:
If the channel is already stored in the group, '
TGID
or
Frequency Exists Accept? (Y/N)
' appears. Press
(.)no
to return.
below.
Press
Menu
to return to '
Select Channel
'. Scroll to '
New Channel
' and press
E/yes
.
Program the rest of the channels the same way.
Edit Channel Options Menu
,
, and your
, you can set your channel options.
http://marksscanners.com/396/396.shtml (25 of 51)8/17/2010 10:11:40 PM
