Dynamic Squelch Control
automatically sets Squelch to the optimal level
for stronger transmission and signal clarity. To scan for weaker signals,turn
Dynamic Squelch Control
off and perform the following steps:
4a. Turn
SQUELCH
fully clockwise so
only strong signals can get through.
4b. Turn
SQUELCH
fully counter
clockwise until you hear a hiss.
Everything gets through - noise,
weaksignals, and strong signals.
4c. Turn
SQUELCH
back clockwise until
the hiss stops. Only clearer signals get
through.
6
To Receive
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
1. Turn unit
ON
and set
VOLUME
Control to a
comfortable level.
2. Select
CHANNEL
.
3. Set switch to
NB/ANL
.
UC343FH 10/23/03 2:32 PM Page 6
