46
2. Release
then press
Hold
within 2 seconds
to hold on the system.
3. Rotate the scroll control to select the channel you
want to lock or unlock.
4. Press
L/O
to lock or unlock the channel.
You can also lock out an active channel by pressing
L/O
while the scanner is stopped on the channel.
ID Scan/ID Search Mode
While you are scanning a trunked system, the scanner
can be in either ID Scan or ID Search mode:
• ID Scan – the scanner only stops on talk group
ID’s that you have programmed into the system
• ID Search – the scanner stops on any unlocked
talk group that becomes active.
To toggle between ID Scan and ID Search, press
then press
Scan
within 2 seconds while the scanner is
scanning the system.
If the scanner does not scan the system long enough
for you to easily do this, press
while the scanner
is scanning the system (or press
then rotate the
scroll control to select the system). Then, release
and press
Scan
within 2 seconds.
Temporarily Holding On a System
To temporarily hold on a system, press and hold
.
To hold on a different system, continue to hold
and rotate the scroll control to select the system.
Normal scanning resumes 2 seconds after you release
.
Holding On a Channel
To hold on a channel, press
Hold
while the channel is
active. To select a different channel, rotate the scroll
control. If you scroll past the beginning or end of the
current system, the scanner selects channels in the
Func
Func
Func
Func
Func
Func
Func
Func
Summary of Contents for BR330T
Page 1: ...BR330T OWNER S MANUAL OWNER S MANUAL ...
Page 153: ...153 One Year Limited Warranty ...
Page 154: ...154 ...
Page 155: ...155 One Year Limited Warranty ...
