background image

2

When using your equipment, always follow basic safety precautions to reduce 

the risk of fire, electric shock and injury to persons, including the following:

This equipment is NOT waterproof. DO NOT expose it to rain or moisture.

DO NOT immerse any part of the product in water. Do not use this product 

near water, e.g., near a bath tub, wash bowl, kitchen sink or laundry tub, in a 

wet basement or near a swimming pool.

To avoid any risk of electric shock from lightning, avoid handling any electronic 

devices (except battery powered ones) during an electrical storm.

Use only the power cord and/or batteries indicated in this manual. Never 

dispose of any batteries in a fire: they may explode. Check with local codes 

for possible special disposal instructions.

Never tug or pull on any power cord: be sure to leave some slack in the cord 

when placing your equipment, and always use the plug to unplug the cord 

from the wall outlet.

Never leave power cords where they can become crushed, cut, or frayed; 

when running power cords, avoid letting them rub against any sharp edges or 

lie across any high traffic areas where people might trip over them.

Do not use the device if the adaptor cords or plugs have been damaged, the 

unit has been exposed to liquids, or the unit has been dropped or is damaged.

•  

• 

• 

• 

• 

• 

• 

This manual contains important information about this product’s 

operation. If you are installing this product for others, leave this manual 

or a copy with the end user.

Important Safety Precautions

Summary of Contents for BW2101





















Reviews: