background image

6

Camera Connection

1. Connect the power cable to the 

    camera’s DC IN jack and then plug 

    the power adaptor to a 240VAC wall 

    outlet.

2. Slide the power switch down once to 

    turn ON the camera.  

NOTE!

  The built-in Lithium battery 

charges automatically when the power 

adaptor is connected. Charge the 

battery to full capacity before using the 

monitor in portable mode. The battery 

is at full capacity when the green 

(battery indicator) turns off.

NOTE!

 Only use the 5V/1A power 

adaptor provided in the package.

1

2

DC IN 5V/1A

Step 1. Connection & Installation

Getting Started

1

2

NOTE! 

The built-in Lithium battery 

charges automatically when the power 

adaptor is connected. Charge the 

battery to full capacity before using the 

monitor in portable mode. 

NOTE!

 Only use the 5V/1A power 

adaptor provided in the package.

LCD Monitor Connection

NOTE!

 In portable mode, charge the 

battery when the battery indicator lights 

up red. 

1. Connect the power cable to the 

    monitor’s DC IN jack and then plug 

    the power adaptor to a 240VAC wall 

    outlet.

2. Press the power button to turn ON 

    the monitor.

Summary of Contents for BW2101





















Reviews: