background image

2

This manual contains important information about this product’s 
operation. If you are installing this product for others, you must leave this 
manual or a copy with the end user.
When using your equipment, always follow basic safety precautions to 

reduce the risk of fire, electric shock and injury to persons, including the 

following:
•  This unit is 

NOT WATERPROOF

. Never submerge the devices in 

water or rinse them in running water. 

•  Always position the device and power cord out of the reach of children. 

The power cord could result in strangulation or cause injury to 

children.

•  Keep small parts out of the reach of children (risk of swallowing).

•  Keep packaging material away from children (risk of suffocation).

•  Never place the Baby Unit in the cot or within the reach of your child.

•  Make sure that cables are out of the reach of your child (risk of electric 

shock).

•  Always make sure that the devices are fully functioning before use.

•  Only use the AC adaptors included with the unit.

•  Do not use the cable to pull the AC adaptor plug out of the socket.

•  Disconnect the AC adaptor plug from the mains when the device is not 

in use.

•  The device and the AC adaptor should not come into contact with hot 

surfaces or sharp objects.

•  Do not use any additional parts that are not recommended by the 

manufacturer or offered as equipment.

•  After use, before cleaning and changing any accessory parts, the AC 

adaptor should always be disconnected.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for BW4151

























Reviews: