20
If
Try
There is no picture
from the camera
•
checking all connections to the camera. Make
sure the adaptor is plugged in.
•
making sure that the cameras and monitor are
both ON.
•
making sure that the camera is in range of the
monitor.
The picture keeps
dropping
•
moving the camera closer to the monitor.
•
repositioning the camera, monitor or both to
improve the reception.
•
adjusting the monitor antenna to vertical
position.
There are audio
problems
•
making sure that there is sound within range of
the camera microphone.
•
moving the camera or monitor farther apart if
the unit emits a loud screeching noise.
There is an irregular
beeping coming
from the monitor
That is the Alert tone. Go to the Alert screen to
turn the alert volume down or off.
The picture has
become choppy
The picture may become choppy when
experiencing a lower frame rate. Try:
•
moving the camera closer to the monitor.
•
removing obstructions between the monitor
and camera.
•
adjusting the monitor and camera antennas to
vertical position.
The monitor picture
has frozen
Use a blunt object like a paper clip to press
RESET
and reset the monitor. The monitor turns
off. Press
POWER
to turn it back on again.
TROUBLESHOOTING
If you have problems with the system, there is often a quick and simple
solution. Please try the following:
