background image

3

Failure to follow these warnings and the assembly instructions could 
result in serious injury or death. This product is not designed or intended 
for use as a medical monitor, nor should this product be used as a 
substitution for medical or parental supervision. Always be sure that both 
the transmitter and monitor are working properly, and are within range of 
each other.  

STRANGULATION HAZARD

. Keep the adaptor cords out of the reach 

of children.  

WARNING: KEEP OUT OF THE REACH OF CHILDREN. 

 

 
Allow for proper ventilation when units are in use. Do not cover the 
camera or monitor with any object such as a blanket. Do not place it in a 
drawer or in any location which would muffle the sound or interfere with 
the normal flow of air. 

Warning to Parents and Other Users

To avoid damage to your equipment, follow these simple precautions:

• 

Do not drop, puncture or disassemble any part of the equipment. 
There are no user-serviceable parts inside.

• 

Do not expose the equipment to high temperatures, and avoid leaving 
the equipment in direct sunlight for more than a few minutes. Heat can 
damage the case or electrical parts.

• 

Do not place heavy items on top of the equipment or expose the 
equipment to heavy pressure.

• 

Remove the power adaptor during long periods between usages.

• 

Clean only with a dry cloth. 

Failure to follow the instructions in this operating manual will void 
the warranty. Uniden assumes no liability for damages to property 
or injury to persons caused by improper handling or failure to 
comply with these safety instructions.

SAVE THESE INSTRUCTIONS!

For best results

Summary of Contents for BW4351

























Reviews: