15
4. Slide the rubber cover down the cable and
cover the MIC jack to seal it from dust.
If you want to use the extension cable, connect
the cable to the radio and the MIC to the
other end of the extension cable.
Disconnect the Microphone
1. Pull back the MIC jack rubber cover and
slide it back along the cord.
2. Push down the MIC jack’s lock tab; tug
gently on the MIC cord until it disconnects.
If you are using the extension cable,
disconnect the cable from the radio and
the MIC from the other end of the extension
cable.
INSTALL RADIO BRACKET/INSTALL RADIO
The CMX660 uses a slide mount assembly to
mount the unit onto a surface. It can be mounted
either below or on top of a surface.
Attach Side Rails
1. Align the guide rails along the sides of
the radio and insert L-tabs into the L-tab
slots. Be sure the slide mount latches face
outward.
