22
moment on the LCD and the
icon stays
on.
4. Press and hold
ANL/HI-CUT
again; the icon
goes away and HI-CUT is turned off
Adjust Radio Sensitivity (LO/DX)
Noise caused by strong signals from nearby
channels may be heard. The
LO/DX
settings
(LOCAL 1 and LOCAL 2) will reduce this noise by
reducing the radio’s sensitivity. If
L1
or
L2
do not
display, noise levels are not reduced.
The number of bands on the LO/DX icon,
,
show which setting is active. Three bands (
)
indicate DX is active. Two bands (
) indicate L1
is active. One band (
) indicate L2 is active.
1. Press
.
DX
displays for a moment and the
DX icon (
) displays; noise levels are
reduced.
2. Press
again
.
L1
displays for a moment
and the L1 icon (
) displays; noise levels
are reduced.
3. Press
a third time
.
L2
displays for a
moment and the L2 icon (
) displays;
noise levels are reduced further.
4. Press
again.
DX
displays for a moment
and the DX icon (
) displays; noise levels
return to normal.
