English - 20
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Ans. Setup
, then select
Security Code
. Use the number keypad to enter a two-digit security code
(
01
to
99
). Press
Menu/select
when you’re finished.
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
0
and
immediately
enter your
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
3. The system announces the time, the number
of messages in memory, and a help prompt.
It beeps to let you know it's waiting for a
command.
4. When you hear beeping, enter a 2-digit
command from the chart. Enter both digits
within 2 seconds or the entry times out.
#
If you don't press any keys for 15 seconds,
the system hangs up and returns to
standby.
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, check this section first. If you
need help, call our Customer Care Line listed on the front cover.
Audio issues
Possible solutions
Callers sound
weak or soft.
x
Move the handset closer to the base or Range Extender.
x
Keep the handset’s battery fully charged.
x
Increase the earpiece volume.
There is noise/
static on the line.
x
If you have any service that uses the phone line, add a DSL
or telephone line filter (see page 22).
01 Repeat message
02 Play message
03 Skip message
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts
