English - 5
5. If your phone prompts you for a PIN code or password to pair with the
D1780-BT, enter
0000
(four zeroes).
6. When your phone accepts the Bluetooth connection, the D1780-BT
sounds a confirmation tone. The Bluetooth device number icon on the
base and the handset display light up.
#
Most cell phones automatically transfer the audio to a Bluetooth
device as soon as it pairs; if yours does not, look in your cell
phone’s Bluetooth setup for a “transfer audio” or “send audio to
device” option.
To test the connection
1. Pick up the handset from the cradle.
2. Dial the number you want to call, then press
CEll
on the handset. You
may not hear a dial tone or ringing, but the handset display says
Talk
.
3. Make sure the call connects and you can hear clearly. (When you’re
finished, press
END/ClEaR
to hang up.)
• The D1780-BT remembers the pairing information for your cellular;
if it loses connection with your phone for any reason (e.g., the cell
phone travels out of range, runs out of charge, etc.), the D1780-BT
can automatically reconnect the next time your phone becomes
available.
Using the D1780-BT with two Bluetooth phones
• The D1780-BT can save the pairing information for two different
Bluetooth phones, but it can only use one cellular line at any given time.
For example, if you pair the D1780-BT to two Bluetooth phones, when
you press
CEll
on the handset, the D1780-BT asks which phone you want
to connect to.
• If you are using the D1780-BT to talk on one Bluetooth phone, the
D1780-BT will not ring if a call comes in on another phone.
• You can set a different ring tone for each paired cell phone (see page 10).
• To pair another Bluetooth phone, just repeat the pairing procedure with
the new phone. (If the paired phone interferes when you’re pairing the
new one, just turn off Bluetooth on the paired phone until you finish
pairing the new one.)
Summary of Contents for D1780-BT Series
Page 28: ...28 English...
